Video Encoding

A little over a year ago one of my friends with a Mac wanted to get into re-encoding video; I knew about the tools to do it on a PC, but none of the tools really had a OS-X port at that time, so I set out on a quest to find tools that could enable a person who didn’t know much about video encoding to accomplish it.

One of the first tools I stumbled on was HandBrake; it was an Open Source project leveraging off of a number of other Open Source products intended on creating a cross platform suite of tools for video encoding that was reasonably straight forward to use and produced reasonable good results.

Well, the version I tested was a near total failure… but the project showed promise and I keep tabs on it for quite some time.

Over the past year it’s steadily improved.  In fact, I’m probably being a little hard on it, since right after I played with an early version a much improved version was available that did work, and did allow my friend to accomplish what he wanted.

Last month HandBrake released a new version — a much improved version.

With Windows, OS-X, and Linux versions you can try out HandBrake for yourself and see the results.

I did two separate tests (and for some reason I always use the same two DVD titles — Saving Private Ryan, and Lord of the Rings — the reason is that both movies have a wide range of  video type from near still images to sweeping panoramic views to everything in motion (blowing up)…

I had two separate machines (a Q9300 and a Q9400 both with 8GB of DDR2) doing the encodes, and did both normal and high profiles; one test was H.264 into a MPEG4 container with AAC created from the AC3 5.1 track; the other was H.264 into a MKV container with AAC created from the AC3 5.1 track in addition to AC3 5.1 pass-through and Dolby Surround pass-through with [soft] subtitles.

For the high profiles: Lord of the Rings took a little over three hours; Saving Private Ryan took just under two and a half hours — so don’t get in a hurry, in fact, run it over night and don’t bother the computer(s).

The high profile achieved about a 2:1 reduction in size; the normal profile achieved about a 4:1 reduction in size.  The high profile’s video was stunning, the normal profile’s video was acceptable.  The AAC audio was acceptable; the AC3 5.1 was identical to the source, and in perfect sync.

There are a number of advantages to keeping your video in a MPEG4 or MKV container verses a DVD image… it’s much easier to catalog and play, and of course it’s smaller (well, you could keep the MPEG2-TS in a MKV and it would be identically sized, but I see little reason for that).

The downside of RIPping your DVDs is that you lose the navigation stream and the extra material.  Do you care???

HandBrake will read source material in just about any format imaginable (and in almost any container as well)… you can take a look at it’s capabilities and features online.

I’ve got some VCR capture streams in DV video that I’m encoding now — trying a few of the more advanced settings in HandBrake to see how it works (well, that’s not really testing HandBrake, that’s testing the H.264 encoder).  My expectation is that once I get the settings right, it will do a fine job; but with video captures you should never expect the first try to be the best (well, I’m never that lucky).

While HandBrake is very easy to use, your ability to get really good results from it is going to partially depend on how willing you are to learn a little about video re-encoding (which will require a little reading and a little experimentation).   But that said, NO product is going to magically just do the right thing in every case…

Overall I would say that HandBrake is one of the best video encoders you’re going to find, and you cannot beat the price — FREE!

Here’s some additional notes.

For Windows 7 you will want to download the DivX trial and just install the MKV splitter (nothing else is needed) so that Windows 7 can play media in a MKV container using it’s native CODECs.

With Windows Media Play 12 and Media Center I haven’t figured out how to switch audio streams; so make sure you encode with the audio stream you want as a default as the first stream.  With Media Player Classic and Media Player Classic Home Cinema it’s easy to select the audio stream.  Also, Windows Media Player will not render AC3 pass-through streams, it will just pass them through the SPDIF/Toslink to your receiver — so you won’t get any sound if you’re trying to play it on your PC.

Don’t delete any of your source material until you are certain that you are happy with the results; and you might want to backup your source material and keep it for six months or so just to be sure (yeah — I know it’s big; but a DVD will fit on a DVD).


Originally posted 2009-12-17 01:00:07.