Disk Drive Temperature / Airflow

I upgraded both of my workstations (one Windows one Linux) to have a mirror pair as the secondary drive…  which added a third drive to each of the cases (the cases are setup so that you can have five 3.5″ internal drives and four 5.25″ external units)… the 400GB SATA-2 drive in the Windows machine keep producing SMART warnings that it was getting close to the recommended maximum temperature, and I decided it likely had to do with the fact that the power management of the motherboard slowed down the main case fan which reduced the airflow.

The case actually had two cutouts for fans in front of the disk drive array, so I wired up a couple fans for each one off a single power connector, put the fans in and now the drives are running cooler (the 3TB SATA-3 drives in the mirror in the Windows machine are much newer drives and run much cooler).

Keep in mind, that the cooler your drives run, the longer they’ll probably last and the fewer problems you’re going to have — plus when you run drives close to their maximum recommended temperature you’re going to see thermal re-calibrations which are going to make your computer look like it’s hanging or at least stuttering.

While I don’t think you should get crazy with fans, you should insure that any location in the case that has a heat producing component should have airflow — and many fans come with speed adjustments so you can run them at their lowest setting and provide enough airflow while minimizing the fan noise (which can be deafening if you have lots of fans).

One last thing — make sure when you buy fans you buy good quality ball-bearing fans — if you don’t, you’re just wasting money and asking for a fan failure (plus way too much noise).

Originally posted 2013-07-10 08:00:16.